Gilbarco HCR 2.0 V17 Card Reader Now Released to Production (Canada Only) May_13_14
Subject: Gilbarco HCR 2.0 V17 Card Reader Now Released to Production (Canada Only)
Attn: NEE Service Managers and DSS Subcontractors
Please be advised that Gilbarco has released the HCR 2.0 V17 card reader for new production and spare parts. Going forward you will receive a mixture of V17 and the previous version card readers. The V17 card reader will replace all previous HCR 2.0 and TCR card readers.
Please note the following:
- Continue to use all remaining V14 HCR card readers (M12492B121) you have in stock until they are depleted
- DO NOT use the new HCR 2.0 V17 card reader at any Suncor/PetroCanada sites until Gilbarco advises it is ok to do so. Gilbarco anticipates approval very soon, but in the meantime you must continue to use the V14.4 (M12492B121) card reader at Suncor/PetroCanada sites
- The shield kit does not come with the V17 card reader. It must be ordered separately
The new HCR 2.0 V17 card reader is very similar to the previous HCR 2.0 card readers with a few exceptions:
× It has a non-conductive bezel or snout. Do NOT use a bezel ground!
× The part number is M012492B023, the kit is M12492K023
× The GCM universal shield (M13193K002) kit is available
For specific details about the HCR 2.0 V17 card reader please see the MDE-5030 and the available LMS Training video ‘HCR 2 V17 standalone’ (details in attached document).
Please contact your local NEE service office if you have any questions.